3mm Acrylic Coloured - Laser Cutting and Engraving Only

Laser cutting has an accuracy of 0.05mm. The laser beam has a kerf thickness of 0.3mm. This means the laser will always accurately follow centre of the laser cutting path in your design removing 0.15mm from each side of the line.

Scribing materials will create a line approximately 0.3mm thick and not cut through.

Engraving on our birch plywood will create a light brown colour approximately 0.2mm deep. Please do refer to photos on our site showing the engraving colour on birch plywood. On Transparent acrylic will create a white shade and coloured acrylic scratch the surface to create an engraving.

Printing on plywood has very good colour reproduction accuracy, but the colours will look slightly darker due to the natural wood colour. For more accurate or brighter, more vivid colours we advise adding white ink layer under the colour. The printing surface is very hard wearing, Uv resistant and waterproof. This can be further enhanced with optional protective matte lacqure.

Printing & laser cutting alignment has an accuracy of 0.5mm, we highly advise that all printed designs have a bleed of 2mm to ensure that the print covers all of the surface of the cut parts. Please follow the file setup instructions within the file templates very carefully.